// Copyright 2005-2009 Western Digital Corporation
// RESTRICTED RIGHTS LEGEND
// Use, duplication or disclosure by any commercial industry (public or private),
private individual or by any Government Agency without an expressed written consent
of release from Western Digital Corporation is subject to restriction set forth in
paragraph (b)(3)(B) of the Rights in Technical Data and Computer Software clause in
DAR 7-104.9(a).
// Manufacturer is:
// Western Digital Corporation
// 20511 Lake Forest Dr.
// Lake Forest, CA 92630
// 1-800-275-4932
//==================================================
=================
WDIDLE3 Version 1.05 for DOS

DESCRIPTION
- DOS Level utility to setup or report the idle3 value.

FEATURES
- Scan for all drives. Non-WD Drives shall only show the model and serial numbers.
- Uses a Vendor Specific Command to set or get the idle3 timer.
- Timer can be set from 8 to 25.5 seconds on older drives.
- Timer can be set from 8 to 300 seconds on newer drives.

USAGE
WDIDLE3 [/S[<Timer>]] [/D] [/R] [/?]
where:
/S[<Timer>] Set timer, units in seconds. Default=8.0 (8.0 seconds).
Resolution is 0.1 seconds from 8.0 to 12.7 seconds.
Resolution is 30 seconds from 30 seconds to 300 seconds.
Note, times between 12.8 and 30 seconds will be set to 30 seconds.
/D Disable timer.
/R Report current timer.
/? This help info.

DOS ERRORLEVEL
0 No error
1 Drive problem
254 Internal program error
255 Invalid command line argument