Witam,

Znajomi przynieśli mi laptopa z płaczem, że się zawiesił i nie uruchamia
się, pisząc, że brakuje jakiegoś pliku.
Po przeskanowaniu okazało się, że ma 129GB błędnych sektorów na 500GB
pojemności.
Błędy są rozłożone w 24 obszarach w miarę symetrycznych.

Obrazek:
http://www.bpa.com.pl/pub/sda.jpg

Raport SMART

> root@sysresccd /root % smartctl -a /dev/sda
>
> smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.37-std350-amd64] (local build)
> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family: SAMSUNG SpinPoint M7
> Device Model: SAMSUNG HM500JI
> Serial Number: S1WFJ9AZ600756
> LU WWN Device Id: 5 0024e9 2029fffb7
> Firmware Version: 2AC101C4
> User Capacity: 500,107,862,016 bytes [500 GB]
> Sector Size: 512 bytes logical/physical
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 6
> Local Time is: Thu Apr 4 11:23:17 2013 UTC
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: FAILED!
> Drive failure expected in less than 24 hours. SAVE ALL DATA.
> See vendor-specific Attribute list for failed Attributes.
>
> General SMART Values:
> Offline data collection status: (0x00)Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 121)The previous self-test completed having
> the read element of the test failed.
> Total time to complete Offline
> data collection: ( 7860) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003)Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01)Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 131) minutes.
> SCT capabilities: (0x003f)SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always
FAILING_NOW 59832
> 2 Throughput_Performance 0x0026 252 252 000 Old_age Always -
0
> 3 Spin_Up_Time 0x0023 091 090 025 Pre-fail Always -
3010
> 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always -
2718
> 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always -
0
> 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always -
0
> 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline -
0
> 9 Power_On_Hours 0x0032 100 100 000 Old_age Always -
2892
> 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always -
0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always -
117
> 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always -
1579
> 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always -
1320
> 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always -
0
> 194 Temperature_Celsius 0x0002 064 054 000 Old_age Always -
33 (Min/Max 6/47)
> 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always -
0
> 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always -
0
> 197 Current_Pending_Sector 0x0032 002 002 000 Old_age Always -
2879
> 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline -
0
> 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always -
0
> 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always -
551
> 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always -
117
> 225 Load_Cycle_Count 0x0032 088 088 000 Old_age Always -
128451
>
> SMART Error Log Version: 1
> ATA Error Count: 28452 (device log contains only the most recent five errors)
> CR = Command Register [HEX]
> FR = Features Register [HEX]
> SC = Sector Count Register [HEX]
> SN = Sector Number Register [HEX]
> CL = Cylinder Low Register [HEX]
> CH = Cylinder High Register [HEX]
> DH = Device/Head Register [HEX]
> DC = Device Command Register [HEX]
> ER = Error register [HEX]
> ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
>
> Error 28452 occurred at disk power-on lifetime: 2891 hours (120 days + 11 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 08 10 2b 11 ee Error: UNC 8 sectors at LBA = 0x0e112b10 = 236006160
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 08 10 2b 11 ee 0a 00:00:06.827 READ DMA
> 27 00 00 00 00 00 e0 0a 00:00:06.827 READ NATIVE MAX ADDRESS EXT
> ec 00 00 00 00 00 a0 0a 00:00:06.827 IDENTIFY DEVICE
> ef 03 46 00 00 00 a0 0a 00:00:06.827 SET FEATURES [Set transfer mode]
> 27 00 00 00 00 00 e0 0a 00:00:06.827 READ NATIVE MAX ADDRESS EXT
>
> Error 28451 occurred at disk power-on lifetime: 2891 hours (120 days + 11 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 08 10 2b 11 ee Error: UNC 8 sectors at LBA = 0x0e112b10 = 236006160
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 08 10 2b 11 ee 0a 00:00:06.826 READ DMA
> 27 00 00 00 00 00 e0 0a 00:00:06.826 READ NATIVE MAX ADDRESS EXT
> ec 00 00 00 00 00 a0 0a 00:00:06.826 IDENTIFY DEVICE
> ef 03 46 00 00 00 a0 0a 00:00:06.826 SET FEATURES [Set transfer mode]
> 27 00 00 00 00 00 e0 0a 00:00:06.826 READ NATIVE MAX ADDRESS EXT
>
> Error 28450 occurred at disk power-on lifetime: 2891 hours (120 days + 11 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 08 10 2b 11 ee Error: UNC 8 sectors at LBA = 0x0e112b10 = 236006160
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 08 10 2b 11 ee 0a 00:00:06.824 READ DMA
> 27 00 00 00 00 00 e0 0a 00:00:06.824 READ NATIVE MAX ADDRESS EXT
> ec 00 00 00 00 00 a0 0a 00:00:06.824 IDENTIFY DEVICE
> ef 03 46 00 00 00 a0 0a 00:00:06.824 SET FEATURES [Set transfer mode]
> 27 00 00 00 00 00 e0 0a 00:00:06.824 READ NATIVE MAX ADDRESS EXT
>
> Error 28449 occurred at disk power-on lifetime: 2891 hours (120 days + 11 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 08 10 2b 11 ee Error: UNC 8 sectors at LBA = 0x0e112b10 = 236006160
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 08 10 2b 11 ee 0a 00:00:06.823 READ DMA
> 27 00 00 00 00 00 e0 0a 00:00:06.823 READ NATIVE MAX ADDRESS EXT
> ec 00 00 00 00 00 a0 0a 00:00:06.823 IDENTIFY DEVICE
> ef 03 46 00 00 00 a0 0a 00:00:06.823 SET FEATURES [Set transfer mode]
> 27 00 00 00 00 00 e0 0a 00:00:06.823 READ NATIVE MAX ADDRESS EXT
>
> Error 28448 occurred at disk power-on lifetime: 2891 hours (120 days + 11 hours)
> When the command that caused the error occurred, the device was active or idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 08 10 2b 11 ee Error: UNC 8 sectors at LBA = 0x0e112b10 = 236006160
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> c8 00 08 10 2b 11 ee 0a 00:00:06.821 READ DMA
> 27 00 00 00 00 00 e0 0a 00:00:06.821 READ NATIVE MAX ADDRESS EXT
> ec 00 00 00 00 00 a0 0a 00:00:06.821 IDENTIFY DEVICE
> ef 03 46 00 00 00 a0 0a 00:00:06.821 SET FEATURES [Set transfer mode]
> 27 00 00 00 00 00 e0 0a 00:00:06.821 READ NATIVE MAX ADDRESS EXT
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
> # 1 Short offline Completed: read failure 90% 2865
107671248
> # 2 Short offline Interrupted (host reset) 70% 587 -
>
> Note: selective self-test log revision number (0) not 1 implies that no selective
self-test has ever been run
> SMART Selective self-test log data structure revision number 0
> Note: revision number not 1 implies that no selective self-test has ever been run
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Completed_read_failure [90% left] (0-65535)
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>


Jaki mógłby być mechanizm takiego zaorania dysku?
Ludzie twierdzą, że wcześniej nie było jakichkolwiek objawów, laptop nie
uczył się latać, uszkodzenie nie wydaje się też rozszerzać.


--
Pozdrawiam,
Andrzej